Retirement Beckons / n4s


9/October/2026 No matter how much you take care of yourself, make plans for your wealth, God will undo and test the very heart of a person. Some say Christians are fools. Indeed, the minds of the unfortunate lie (if only to itself) of the inequity we bear. To damage ourselves or to bear damage for the sake of others is unnatural. Liars are thrown into the lake of fire. What I'm saying is; don't bear what you can't bear. Worshiping God -doing the things He wants, without care or worry is most important. If you were poor, and innocent, do not take on suffering. Thus I help out in a limited way. I have my reasons not to be maimed -I have no wife or kids, nor healthy parents. Don't be fools and turn into jealous liars.

Let those with the resources bear the attacks of the Enemy. Some bear migraines, others blindness, dentures, what I bear is stress, blame, and cancer-givers. I am also bearing vengeance and thus have many minor aches and pains, and a lack of money / achievements. I also bear constipation and lately, weight gain / appetite. Can't say it's all, parts of me are being attacked now and then but I do not pray for the FULL thing to be put on my shoulders. And I don't think anyone should.

Retirement beckons, n4s nears wrap up. I have no further books to write, nor apps to code. Unfortunately, the air polution index here in PJ is high. Have to work out indoors and shut the windows, put on a/c. As usual, I have to wait till evening to get fully cleaned, tho I go every morning. It had been that way with me since my school days. Gradually beating the code into shape. Quite mindless at this point. Liew witches beaten onto us by some of the west, who believe they control the tribulation. Perhaps. But mainly it is God who calls the shots 'in the Spirit', not any one Christian / secular self-spirit. You can tell if it is God who wants something done -it will be easy and within your abilities and sensibilities. God will never say, go drown yourself, throw your baby off the condo, etc.

Coding n4s Wraps Up

After a marathon session of hard coding, I managed to generate a simulator.py file that works without any kludges. It's still early, circa 8pm, so I might try to do a subcircuit integration. And I have yet to add the VI readouts. It will definitely become tomorrow's work as well. Seems like there's something going on in mindspace. There was a failed ceasefire with the UK. And there were some attacks afterwards, reported. Much of the problems both parties suffer from are due to the Liew witchy 6, mostly LiLian and Barneous. I will be drawing a KDL strip on Judas tomorrow, the shadow of the Man of Sin, with some personal research I put in alongside Pastor Aaron ATL's research. Find him on YouTube. Also Rabbi Tovia -a very charismatic man aside from Jonathan Cahn who is messianic and prophetically-linked to God's plan.

The source code so far is as below:

#!Python3
#
# net4spice is an ASCII circuit diagram interface to PySpice - NgSpice
# net4spice v0.2.1b is FREE software (c) 2026 C. K. Yap, chnkngyp@gmail.com

import re, sys, subprocess

# the input file
filePath = "./netlists.txt"
pyPath = "./bin/python3"
simPath = "./sim4spice.py"
numCol = 0
subIDX = 0

# non-matrix
ccComps = []
ccLinks = []
ccProps = []
pastComps = []

# matrix
ccC = []
dC = []


# The simulation setup code strings were borrowed from various sources
simHead = '''#!Python3
#This file is auto-generated by n4s.py

import matplotlib.pyplot as plt
import PySpice.Logging.Logging as Logging
logger = Logging.setup_logging()
from PySpice.Doc.ExampleTools import find_libraries
from PySpice.Probe.Plot import plot
from PySpice.Spice.Library import SpiceLibrary
from PySpice.Spice.Netlist import Circuit, SubCircuit
from PySpice.Unit import *
libraries_path = find_libraries()
spice_library = SpiceLibrary(libraries_path)
\n'''

simMid = '''\n\ndef simCircuit():
    global ccV, ccI

    figure, ax = plt.subplots(figsize=(20, 10))
    simulator = circuit.simulator(temperature=25, nominal_temperature=25)
    analysis = simulator.transient(step_time=source.period/20, end_time=source.period*2)
    
    ax.set_title('')
    ax.set_xlabel('Time [s]')
    ax.set_ylabel('Voltage [V]')
    ax.grid()
    ax.plot(analysis['in'])
    ax.plot(analysis.out)
    \'\'\'addAnother\'\'\'
    ax.legend(('input', 'output'), loc=(.05,.1))
    
    plt.tight_layout()
    plt.show()
\n'''

# The replace code is my own work; create a sim.py file to exec.
def writeNetlist():
    global ccProps, simHead, simMid, subccHead, dC, subIDX
    netTxt = ['','','','','','','','']
    mainDeclare = ""
    subDeclare = ""
    subDeclareFirst = ""
    xDeclare = ""
    newNode = ""
    newLegend = ""
    foundIP = ""

                
    for row in ccProps:
        tmp0 = row.split('|')
        if len(tmp0) > 1:
            for t in tmp0:
                if t != '':
                    temp = t.strip().split(' ')
                    if temp[0][0] in ">^":    
                        temp[0] = temp[0][1:]
                    if temp[0][-1] in ":=":
                        temp[0] = temp[0][:-1]
                    for dL in dC:
                        if temp[0] in dL['comp']:
                            tmp = listComp(temp, dL['comp'].strip('_'), dL) + '\n'
                            if subIDX == 1:
                                if 'circuit.model' in tmp:
                                    tmp = tmp.replace("circuit.model", "\n" + "circuit.model")
                                netTxt[subIDX] += tmp
                            else:
                                tmp = tmp.replace("circuit.", "")
                                if 'model(' in tmp:
                                    tmp = tmp.replace("model(", "\nsub" + str(subIDX) + ".model(")
                                    netTxt[subIDX] += "sub" + str(subIDX) + "." + tmp 
                                elif 'source = ' in tmp:
                                    tmp = tmp.replace("source = ", "source = sub" + str(subIDX) + ".")
                                    netTxt[subIDX] += tmp 
                                else:    
                                    netTxt[subIDX] += "sub" + str(subIDX) + "." + tmp 
                 
                 
    netTxt[subIDX] = re.sub(r"(?<=\d)(?=[munkFAVOHM])", "@u_", netTxt[subIDX])
    netTxt[subIDX] = netTxt[subIDX].replace("'circuit.gnd'", "circuit.gnd")           


    for row in ccProps:
        tmp0 = row.split('|')
        if len(tmp0) > 1:
            for t in tmp0:
                if t != '':
                    tmp1 = t.strip().split(' ')
            
                    if tmp1[0][0] == "^": #voltage
                        for dL in dC:
                            if tmp1[0][1:] in dL['comp']:

                                newNode = dL['out']

                                oldLegend = re.search(r"ax\.legend\(\(.+?\)", simMid)
                                match = oldLegend.group()
                                newLegend = match.replace(")", ", '" + newNode + "')")
                                simMid = simMid.replace(match, newLegend)
                                simMid = simMid.replace("'''addAnother'''", "ax.plot(analysis['" + newNode + "'])\n    '''addAnother'''")

                    elif tmp1[0][0] == ">": #current
                        for dL in dC:
                            if tmp1[0][1:] in dL['comp']:

                                newNode = "inter_" + dL['in1']
                                
                                netTxt[subIDX] = insertProbe(netTxt[subIDX], dL)
                        
                                oldLegend = re.search(r"ax\.legend\(\(.+?\)", simMid)
                                match = oldLegend.group()
                                newLegend = match.replace(")", ", '" + newNode + "')")
                                simMid = simMid.replace(match, newLegend)
                                simMid = simMid.replace("'''addAnother'''", "ax.plot(analysis['" + newNode + "'], linestyle=(0, (2, 10, 2, 10)))\n    '''addAnother'''")

                    if tmp1[0][-1] == ":": #input
                        for dL in dC:
                            if tmp1[0][:-1] in dL['comp']:

                               foundIP = dL['in1']

                    elif tmp1[0][-1] == "=": #output
                         for dL in dC:
                             if tmp1[0][:-1] in dL['comp']:
 
                                 #newNode = dL['out']
                                 if subIDX > 1:
                                     subDeclare = "circuit.subcircuit(sub" + str(subIDX) + ")\n"
                                     subDeclareFirst = "sub" + str(subIDX) + " = SubCircuit('s" + str(subIDX) + "', 'sc" + str(subIDX) + "_" + foundIP + "', 'sc" + str(subIDX) + "_" + dL['out'] + "', '0')\n"
                                     
                                 else:
                                     mainDeclare = "circuit = Circuit('Main" + str(subIDX) + "')\n"
                                     xDeclare = "circuit.X('sc" + str(subIDX+1) + "', 's" + str(subIDX+1) + "', '" + foundIP + "', '" + dL['out'] + "', '0')\n" 
                     
 
    with open("sim4spice.py", "a") as fa:
        if subIDX == 1:
            fa.write(mainDeclare)
            fa.write(netTxt[subIDX] + "\n")
            fa.write(xDeclare)
        elif subIDX > 1:    
            fa.write(subDeclareFirst)
            fa.write(netTxt[subIDX] + "\n")
            fa.write(subDeclare)

# If output of SubCircuit to a transistor (2 inputs)                 
def dIPQ(pos, comp):
    return "'in1'"

# Current probe
def insertProbe(netL, compProbed):
    global subIDX

    nodeIN = compProbed['in1']
    probeString = "circuit.V('probe_" + nodeIN  + "','inter_" + nodeIN + "', '" + nodeIN + "', 0@u_V)"    
    netL =  netL.replace("'" + nodeIN + "'", "'inter_" + nodeIN + "'")
    netL += probeString + "\n"
    return netL


def listComp(temp, dLC, dL):
    global dC, subIDX
    nL = ''
    scPre = ""
    
    if subIDX > 1:
        scPre = "sc" + str(subIDX) + "_"

    if 'Vi' in temp[0]:
        if len(temp) < 3:
            temp.append('0Hz')

        txt = "source = circuit.SinusoidalVoltageSource('^ID', '^NODE1', '^NODE2', amplitude=^VALUE1, frequency=^VALUE2)"
        nL = txt.replace("^ID", dLC).replace("^NODE1", scPre + dL['in1']).replace("^NODE2", scPre + dL['out']).replace("^VALUE1", temp[1]).replace("^VALUE2", temp[2])
        return nL

    elif 'V' in temp[0]:
        txt = "circuit.V('^ID', '^NODE1', '^NODE2', ^VALUE1)"
        nL = txt.replace("^ID", dLC).replace("^NODE1", scPre + dL['in1']).replace("^NODE2", scPre + dL['out']).replace("^VALUE1", temp[1])
        return nL

    elif 'A' in temp[0]:
        txt = "circuit.I('^ID', '^NODE1', '^NODE2', ^VALUE1)"
        nL = txt.replace("^ID", dLC).replace("^NODE1", scPre + dL['in1']).replace("^NODE2", scPre + dL['out']).replace("^VALUE1", temp[1])
        return nL

    elif 'R' in temp[0]:
        txt = "circuit.R('^ID', '^NODE1', '^NODE2', ^VALUE1)"
        nL = txt.replace("^ID", dLC).replace("^NODE1", scPre + dL['in1']).replace("^NODE2", scPre + dL['out']).replace("^VALUE1", temp[1])
        return nL

    elif 'C' in temp[0]:
        txt = "circuit.C('^ID', '^NODE1', '^NODE2', ^VALUE1)"
        nL = txt.replace("^ID", dLC).replace("^NODE1", scPre + dL['in1']).replace("^NODE2", scPre + dL['out']).replace("^VALUE1", temp[1])
        return nL

    elif 'L' in temp[0]:
        txt = "circuit.L('^ID', '^NODE1', '^NODE2', ^VALUE1)"
        nL = txt.replace("^ID", dLC).replace("^NODE1", scPre + dL['in1']).replace("^NODE2", scPre + dL['out']).replace("^VALUE1", temp[1])
        return nL

    elif 'D' in temp[0]:
        txt = "circuit.D('^ID', '^NODE1', '^NODE2', model=^MODEL1)"
        nL = txt.replace("^ID", dLC).replace("^NODE1", scPre + dL['in1']).replace("^NODE2", scPre + dL['out']).replace("^MODEL1",'1N4148')
        return nL

    elif 'Q' in temp[0]:
        txt = "circuit.BJT('^ID', '^NODE1', '^NODE2', '^NODE3', model='^MODEL1')circuit.model('bjt', 'npn', bf=80, cjc=pico(5), rb=100)"
        nL = txt.replace("^ID", dLC).replace("^NODE1", scPre + dL['in1']).replace("^NODE2", scPre + dL['in2']).replace("^NODE3", scPre + dL['out']).replace("^MODEL1", temp[1])
        return nL

    #elif 'O' in temp[0]:
    #    txt = "circuit.X('^U1', 'BasicOperationalAmplifier', 'circuit.Vdd', 'circuit.Vss', 'circuit.out')"
    #    nL = txt.replace("^UI", dLC)
    #    return nL

    else:
        return ''

# I wrote this circuit node finder myself, so it may be freely re-distributable.
# The integration with / and the ASCII circuit diagrams, are also my own design.

# Positional placement of components versus op, inputs 1, or 2.
def ipQ(pos, comp, ip): # Q, Vi instance
    global ccC

    if 'Q' not in comp:
        if pos == 2:
            return 'out'
        else:
            return 'in1'

    x = 0
    x2 = 0
    y = 0
    y2 = 0

    for n, r in enumerate(ccC, start = 0):
        for n2, c in enumerate(r, start = 0):
            if c == ip:
                x = n2
                y = n
            elif c == comp:
                x2 = n2
                y2 = n

    if x > x2:
        if y > y2:
            return 'out'
        elif y < y2:
            return 'in1'

    elif x < x2:
        return 'in2'

def findNodes():
    global ccC, dC

    # Gets circuit components into dictionaries, in a list
    for i, rowC in enumerate(ccC):
        for j, colC in enumerate(rowC):
            if len(colC) > 1 and colC[:1] in 'DVARLOCKQS': 
                dC.append({'comp' : colC, 'in1' : '', 'in2' : '', 'out' : ''})

    # Horizontal linkages for ip and op
    for i, rowC in enumerate(ccC, start = 0):
        for j, colC in enumerate(rowC, start = 0):
            if j+1 < len(rowC) and j-1 >= 0:

                if '_' in rowC[j-1]:

                    for dL in dC:
                        if dL['comp'] == colC:
                            dL[ipQ(1,colC,rowC[j-1])] = rowC[j-1]
                            break        

                if '_' in colC:
                    
                    for dL in dC:
                        if dL['comp'] == colC:
                            dL[ipQ(2,colC,rowC[j+1])] = rowC[j+1] 
                            break

    # Vertical linkages for ip                              
    for i, rowC in enumerate(ccC, start = 0):
        for j, colC in enumerate(rowC, start = 0):
            if i+2 < len(ccC) and j+1 < len(rowC):
                
                if ccC[i][j] in '\\':

                    for dL in dC:
                        if dL['comp'] == ccC[i+1][j+1]:
                            dL[ipQ(1,ccC[i+1][j+1],ccC[i-1][j])] = ccC[i-1][j]
                            break

                elif ccC[i][j] in '/':

                    for dL in dC:
                        if dL['comp'] == ccC[i+1][j]:
                            dL[ipQ(2,ccC[i+1][j],ccC[i-1][j+1])] = ccC[i-1][j+1]
                            break                       

                elif ccC[i][j] in '|':

                    for dL in dC:
                        if dL['comp'] == ccC[i+1][j]:
                            dL[ipQ(1,ccC[i+1][j],ccC[i-1][j])] = ccC[i-1][j]
                            break                               

    # " op
    for i, rowC in enumerate(ccC, start = 0):
        for j, colC in enumerate(rowC, start = 0):
            if i-2 >= 0 and j+1 < len(rowC):

                if ccC[i][j] in '\\':
                
                    for dL in dC:
                        if dL['comp'] == ccC[i-1][j]:
                            dL[ipQ(2,ccC[i-1][j],ccC[i+1][j+1])] = ccC[i+1][j+1]
                            break                                
                            
                elif ccC[i][j] in '/':

                    for dL in dC:
                        if dL['comp'] == ccC[i-1][j+1]:
                            dL[ipQ(2,ccC[i-1][j+1],ccC[i+1][j])] = ccC[i+1][j]
                            break                          

                elif ccC[i][j] in '|':

                    for dL in dC:
                        if dL['comp'] == ccC[i-1][j]:
                            dL[ipQ(2,ccC[i-1][j],ccC[i+1][j])] = ccC[i+1][j]
                            break

    # Keywords required in a pySpice circuit
    for dL in dC:                
        if 'Vp' in dL['comp']:
            dL['in1'] = 'p'
            dL['out'] = 'circuit.gnd'
            
        elif 'Vi' in dL['comp']:
            dL['in1']  = 'in'
            dL['out']  = '0'
            
        elif 'Vo' in dL['comp']:
            dL['in1']  = 'out'
            dL['out']  = '0'    
            
        elif 'Rl' in dL['comp']:
            dL['in1'] = 'out'
            dL['out'] = '0'

        elif 'i' in dL['out']:
            dL['out'] = '0'    

    # Each connected component assigned a rough node no.
    nodeSpider('comp','in1',1)

    # Handle special cases, V in and V out which are not inputs
    for dL in dC:                
        if 'Vi_N' in dL['in1']:
            dL['in1'] = 'in'
        elif 'Vi_N' in dL['in2']:
            dL['in2'] = 'in'
        elif 'Vi_N' in dL['out']:
            dL['out'] = 'in'

        if 'RlN' in dL['out']:
            dL['out'] = 'out'
        elif 'RlN' in dL['in1']:
            dL['in1'] = 'out'
        elif 'RlN' in dL['in2']:
            dL['in2'] = 'out'


# comp is compared to ip/op
# io/op compared to comp
# Node labels, consolidated
def propaGator(comp):
    global dC
    global pastComps

    for dL in dC:
        if not comp in pastComps and dL['comp'] == comp.split('N')[0]:
            if len(dL['out']) > 1:
                dL['out'] = comp
                pastComps.append(comp)
                comp = dL['out']
                propaGator(comp)

def nodeSpider(p1,p2,n):
    global dC

    for dL in dC:
        d = len(dC) - 1
        while d >= 0:
            p1 = 'comp'
            p2 = 'in1'
            if len(dC[d][p2]) > 1 and dL[p1] == dC[d][p2]:
                if not 'N' in dC[d][p2]:
                    dC[d][p2] = dC[d][p2] + 'N' + str(n)
                    propaGator(dC[d][p2])
                
            p2 = 'in2'
            if len(dC[d][p2]) > 1 and dL[p1] == dC[d][p2]:
                if not 'N' in dC[d][p2]:
                    dC[d][p2] = dC[d][p2] + 'N' + str(n)
                    propaGator(dC[d][p2])
            
            p2 = 'out'
            if len(dC[d][p2]) > 1 and dL[p1] == dC[d][p2]:
                if not 'N' in dC[d][p2]:
                    dC[d][p2] = dC[d][p2] + 'N' + str(n)
                    propaGator(dC[d][p2])

            d -= 1
        n += 1

#compare before and afters
def storeOldPlot():
    return 0
        
# clear simulation file
with open("sim4spice.py", "w") as fw:
    pass

with open("sim4spice.py", "a") as fa:
    fa.write(simHead)

with open(filePath, "r") as f:
    #if fileChanged < os.path.getatime(filePath) or fileChanged == 0:
    for lc, line in enumerate(f, start=0):
        if line.startswith('['):

            findNodes()
            writeNetlist()
            storeOldPlot()
            subIDX += 1

            ccProps = []
            ccLinks = []
            ccComps = []
            ccC = []
            dC = []
            pastComps = []

        elif line.startswith('|'):
            ccProps.append(line)
        elif line[0] in '^':
            l = line.split()
            for e in l:
                if l.index(e) > 0:
                    ccLinks.append(e)
            ccC.append(ccLinks)
            ccLinks = []    
        elif line[0] in '>':
            l = line.split()
            for e in l:       
                if l.index(e) > 0:
                    ccComps.append(e)
            ccC.append(ccComps)
            ccComps = []

with open("sim4spice.py", "a") as fa:   
    fa.write(simMid + "\nsimCircuit()\n")

result = subprocess.run([sys.executable, simPath])

It requires python3 and a bunch of modules you can install with pip3 on most any OS. And it also requires a netlists file which you can get below;



[stage1]

>       Vp      .       p       p       .       .                     
^       |       .       |       |       .       .                                      
>       GND     .       R1      Rc_     C2_     Rl               
^       .           /        /  .       .       |              
>       Vi_     C1_     Q1      .       .       i      
^       |           \        \  .       .       .        
>       i       .       R2      Re      .       .     
^       .       .       |       |       .       .        
>       .       .       i       i       .       .        
^       .       .       .       .       .       .           

| Vp 15V
| R1 100kOhm | ^Rc 10kOhm | C2 10uF | Rl 1MOhm
| Vi: 0.5V 1kHz | C1= 10uF | Q1 bjt 
| R2 20kOhm | >Re 2kOhm

[substage1]

>       .       .       .       .       .       .                          
^       .       .       .       .       .       .                                         
>       .       .       .       .       .       .
^       .       C1_     R1      .       .       .
>       .       .       |       .       .       .
^       .       .       GND     .       .       .
>       .       .       .       .       .       .
^       .       .       .       .       .       .
>       .       .       .       .       .       .
^       .       .       .       .       .       .

| C1= 10uF
| R1: 100kOhm

[end]



The modules are PySpice, ngspice, matplotlib. Will update the code on this page when subcircuit integration is ready. Just now we trapped the Liew crackers as they tried to destroy important US companies by pressing me onto their CEO / management. We used layered on freezings to dissuade the others from direct attacks.

Prophecy and Confusion Will be Explained

There came a call to explain prophecy; are we in it and what then should we do? Prophecy is logic given by God who knows the interplay of good and evil. The Spirit says good and evil have always coexisted but evil will come to dominate the end times. That people give in to evil is expected by Jesus / Paul / Jude / John etc. But will there come a time when evil is accepted and practiced? Yes, as in the days of Soddom and Gommorah, the days of Noah. What we see today is just the tip of the iceberg. There will be war until the end, which cometh [suddenly] as a flood. Thus it does no good to be cruel to one's own country and institutions / corporations / leaders. Where would you go when the evil takes over? Good or evil? Neither will be a friend.

Dad is getting more sick. I am slowly recovering. The a/c is not so noisy today for some reason. I turned off ECO mode and raised the temperature half a degree, with auto fan on quiet. Will exercise and take my meds soon. Liew witches and their kid converts are attacking round the clock in mindspace. Will probably not get much time to myself tonight. Yea, where are we in prophecy? Where is the key that unlocks its mystery? A friend of mine is drawing it up; 'Yap's Gospel Prophecy of 4 Layers'.

Showered and changed into fresh clothes. Well past midnight. Remembered to brush. Took meds earlier. There is down time so I am coding a little bit more, passing some data to the sim4spice file from n4s. Tomorrow, house cleaning day. I have been sick over a week. Next week is hospital visit day. I need to define multiple substages / additional stages. Could take a few hours. Today was rough as there was a tricky iteration error in building the netlists.

Playing SeTT

Had supper of cheese, bread, and butter. Drank a black coffee. Way past 1am. Need to re-brush. Workout went well. Am feeling that energy burn. All in just 3 minutes / day. At 50, you gotta tone down. I updated SeTT to 1.4.2b, which is pleasant to play against. A fair share of wins and draws, not just losses for the AI. Seems I may have a few downloads.

Am up late this Saturday morning. Brushed. Drank some plain water. Past 10am. The a/c isn't noisy anymore. Was afraid the neighbors would complain. Liew witches still marauding someway off. Code soon, n4s blind-creates a simulation file; sim4spice.py. Running that, is what gives the results. Today's work may take a while. I'm not sure I want to do more than 1 substage now. Just to see if it's possible, and what the graph will be like.

Being Christian, Being a Friend

I was thinking of my cousin, and we are both Christian. And I wanted to tell her a parable. I once craved a tennis racket. I bought it for 300RM, a beginner's model. Later, I saw one for sale for 130RM which was better (factory reject). I made all the mistakes with my rackets, including over-weighting, too thick strings, expensive Tourna Gripping, expanding the hilt / pommel like Gasquet's. Years went by. I discovered I needed thinner strings, only 3g of weight per head-side, and a leather grip that doesn't flake. I admitted the standard butt flare was enough. And when I was pleased with it, I started dreaming of how I could improve my game. And it came to me 2 things, a spin scrape can soften an off-sweetspot hit, and a backhand (body behind racket) requires a different frame of mind from forehand (body front of racket). And once I discovered these 2 simple things, I was finally happy.

The explanation; Bible knowledge is given out when we understand more -more is given. When we labor under odd misconceptions, we waste time and hurt ourselves / others. When we seek, we will find. When we find, we do understand, we praise God and love our friends / neighbors.

The context (for myself); I like Bibles (like a fish likes bait). So too I love tennis rackets and other cool stuff. But due to hangups (inherited mis-teachings), I never saw the truth until God chose me; I saw the perfectly fine, cheap pro racket. I never learnt to worship until I was 48 years old. Fiddling with one's beliefs / racket is not worship. Again, God helped me, through a friend's hints, long ago, and I was able to understand where I went wrong. At 50, I am able to play tennis and to practice my religion. So the moral is not to do funny things with your life, learn quickly from others' testimony, granted that Jesus is so charismatic and His words are so deep, we still need effort to know Him and this is done by showing effort in the things of this world which benefit ourselves and others, so He may reveal to us the knowledge of our own souls / bodies / minds.

I drew today's KDL strip. Was invigorating. Now onto chores, this rainy Saturday. Swept the shoebox we live in. Will mop at 3:30-5pm, after a rest. Finally emptied my waste basket which had overflowed since I had a cold some week ago. Lotsa dust and hair cleaned up. Not much time to code till after dinner. I mopped most of the floor, not yet the rooms and it's almost 5pm. Was talking to my uncle's family about the exchange of spiritual gifts among those who need help. Spiritual gifts are good for one's whole wellbeing. And I will continue thru today, to give out these things here in Malaysia, mainly.

I managed to fit multistage capability into n4s, which is a very simple script. I hope to keep it lean. Simulating the full circuit(s) comes next, that should be all for today. Managed also to get cleaned well after drinking a cup of prune juice. Went twice. I also cut the legs off my Uniqlo AIRism trunk briefs. They weren't ventilated enough. Now they feel comfortable in the humid Malaysian clime. Saves me 100RM+, getting a pair of nice underwear from CK or LL. Will try to head out on a walk tomorrow. Tho the air polution index is 87, which can cause serious health problems. Will bring a mask. Need a rest before finalizing the multistage code. I haven't mopped any rooms yet.

Mopped 2 rooms. The Folks' bedrooms. Dad can have a break and recover from his cough. Mopped my room but not the store room. We're busy fighting off the Liew witches, who are fighting back with almost everything while being helped by genius unbelievers. We are gaining on the evil, but what's next? Will they attempt to blow up the world internally / externally? Will there be an outbreak of dangerous diseases? More plane hijacks? The lesson is clear; don't mess up people / witches in mindspace -it will be war till the very end.

The Problem With the World

The following are the effects of Antichrist / world events started by Antichrist;

  1. Lack of love in Spirit or telepathy (when we reach out for help)

  2. Many will reach out for few who still love unconditionally, destroying the poor soul. They need to do stuff like read books / movies, made with love -not for money or fame.
  3. Crimes such as ME terrorism / Zionism

  4. There should be braver people everywhere -tell everyone to be vigilant and discreet.
  5. First reports arrive to psychiatrists (something's gone wrong)

  6. Remember that doctors must do no harm -psychiatry is to restore love to your heart.
  7. Wave of government studies on societal behavior, etc.

  8. The COVID vaccines were IMHO a study -I felt odd things (as a clairvoyant) given the vaccine. So be cooperative with your authorities and not cause trouble, against a good plan or a national interest.
  9. Revivals (religious) that failed

  10. Religion is breaking down. First hand, I have seen the stress on those who know God's mysteries. One should at this point, tell more people discreetly, spread the knowledge.
  11. Zenophobia in social circumstances

  12. People who are different should stay apart. Sorry for this, but it does help in the Tribulation to come.
  13. Body damaging and damage -cancer, etc.

  14. By all means, shrug off self-inflicted harm. Cancer is a self-infliction.
  15. Body enhancing (being both 2 the result of sorcery)

  16. You may enhance yourself but beware you may not live long afterwards.
  17. Fear of shame, sin (dirty), being non-compliant / un-PC

  18. When somebody exposes you, remember your duty to God, King, and country is your guiding principle.
  19. Seeking luxuries (vine of the earth)

  20. Buy one or two things that enhance your look / status, then be very frugal as times like these move through your life.
  21. Restlessness (as if lacking essentials to survive)

  22. Make sure you have achievements, are well regarded by many people as possible, friends are important to help you through worries and cares, and it doesn't take lots of money.
  23. Suicidal / cult / pushing celebs to death

  24. The reasons behind celeb flogging are that they are made to say things -influence. To do things that are obscene, outrageous. Care for your celebrities, they are the most talented people on earth and there are few who are natural leaders.

Failed to Wrap up n4s

The sim code generation is a mess. Now circa midnight, Need to work out at 1am. No time to sort out these pesky bugs. I have lost track of my variables due to my stroke in 2007. Should take an hour or so to straighten out but tonight, just to rest. Haven't mopped the store room. Okay done that. Not feeling very tired or sleepy yet. Was watching YouTube on the San Martin titanium GMT. Cost $300, which is way over budget. Have decided to visit SunriseTimeCentre tomorrow to look at their Albas. I am looking for a ladies' watch that looks like a flush bracelet -my gift to Mom who is now wearing a watch regularly. Dad is still coughing violently. Hope he recovers. Niece no.2 has some acne issues. Hope she pulls thru as well. My Kinetic has gained 3s in almost a month.

Auto-generating a simulation file requires lotsa string splicing and re isn't my strength. Made lotsa mistakes while being dragged off to help with the witchcraft / sorcery. Well, at least we have some info on these mind crackers and some passive defences. I will have to gradually sort out the regexes when the coast is clear. Jake claimed he was the target of scrapers. Seems true. We used spiritual rebukes to dissuade further threats. The mind must be a safe place to deal and help. Can't wait to head out tomorrow and see my old friends at the AD, maybe buy a watch for Mom.

Had yogurt for supper. Just worked out and am feeling all senses alert. Am eating less. Found out my cousin's place up north a bit, is free of haze where here in PJ, it is double. Can't wait to go watch hunting on Sunday.

Sunday is here. Was assaulted by westerners looking for fun and to blame me for sins of their own making, being somehow 'friends' of the Liew witchy 6. The mindspaces are a mess but perhaps it is the only way a rebellion (against God) can forment. I may be wrong. Managed to get cleaned well after 3 tries, n4s is still unfinished at the very last stage -auto subcircuit capability.

I Bought Mom's Birthday Present

A Universal Geneve manual-winding ladies watch from the 70s. Checks out okay. Running well. S/N is correct. Supposed to house a good movement; the 1-42 ultra thin. Cost a pretty penny. Came on a very slim leather strap with signed crown and no seconds hand. Dial is marked 'SWISS'.

Unfortunately, I do not have the skill to pry open the back but was assured it is genuine. In a twist of fate, it slipped half an inch off my plank and now it's doing +30s / day. Was 50s+ earlier. I will present it to Mom next month, assuming I am still alive, at our joint(?) birthday celebration. Have to say it looks handsome. I will say it was NOS which means not-worn-before. Mom hates used goods for some reason. The sticker on the back can corroborate this.

Followed Mom to the care facility to deposit moisturizer for Grandma as she was unfamiliar with the car Dad normally drives. Parking was a disaster, next to, of all things, a shiny new BMW. Dad finally took some food. Was thinking my Niece could use the UG if Mom doesn't accept it. Don't feel much like working on n4s this Sunday. Maybe later tonight. Found out that UG was a top supplier of watches to the militaries in WWII, because they had a good chrono movement, and at some point they sold like Tudor to PP. It is the highest horology piece I have ever bought. TGV and I were admiring it. I was sorry I took it out on his deceased mother following William and Harry's attempts to recruit celebs which is ill-advised. Sometimes, in war (even mind war) there is damage.

Found out the UG was made in '75-76. Around when I was born. There is an uprising of crackers in the mindspaces, among western powers. Mainly children and baby minds who were told lies in an elaborate pre-agreed cover up. Powers are flashing thru the mindspaces as peace is taken from the hearts of those who chose to corrupt love. Perhaps the apostasy is indeed at hand.

I can't believe Mom will have her 'Rolex'. A watch mentioned in the same circles at Patek Philippe back in the heyday of Swiss mechanicals. And Dad will have his 'Mercedes', a paid-for gift from his own people on the Mainland -specifically a Daimler-something electric self-driving / parking. And as for me, I led some to righteousness, some, to salvation.

Trying to Finish Coding

Slept a lot this morning, managed to get cleaned easily, brushed. Mom's UG has gained circa half a minute in 24 hours. Had a good lunch of chapfarn with her. Dad is at the old house, recuperating. I wonder how my uncle down south is doing. Surgery needed, but he's a real fighter. Will try to get the simulation running for subCircuits this afternoon. Kids out for blood over 9-11 and 7-7. I'd been planted with memories of the terror and am taking some hits.

And I was thinking that trying to talk Jesus with my Folks fell on deaf ears because they didn't have the things of this world first, to assure the things from Heaven later. I do hope the self driving car is available to me -yea the small 2-seater I wrote of in my short story 'Old Man's Car'. Funny, I realized that the couple who bought the tiny ladies' watch before my UG, may have bought a PP. These list in the thousands, even used. I got my chance to see a PP being sold just like I longed for. And then to buy a luxury watch myself. God is watching!

Am still unable to enable subcircuit simulation despite consulting AI and PySpice documentation. But tomorrow, I shall be out on a long walk, just before my psych clinc visit. I lost almost 1kg over the past few days. Less snacking and regular exercise, perhaps. A lot of it was fluid retention. In fact, drinking more water and lattes got rid of the excess fluids around my waist. I am still a little bloated up front for some reason.

In a way I am trying to reverse engineer a PySpice example. Learn from both ends, since I am a monkey see monkey do programmer, but with bold design ideas. Was dumped on and had to wipe up a bit. Took my meds at midnight and will work out at 1am. Managed to get the simulation going with a subcircuit keyed in by hand. It's a bit late to work on it as the Liew forces need to be handled. They used a load of poor people, mad people with lower conscience, etc. Good luck, and eat well from the store of 'good food' in my room. Poor people now have some millions to share and make a living. There is a wrap up. Had crackers and cheese wit butter for supper. Almost time to work out. Feeling good despite being at the desk all day. I may head to TRX tomorrow.

Was reading about inflation and job loss in America and me and my Punjabi friends were discussing; if there were no war / conflict, then nobody would withhold or calculate -Money would be free -things would be very affordable / cheap. It ins't that funding a war is expensive, it's the war mentality, soon the recession will hit. If everyone loved one another, jobs wouldn't be jobs, just hires when necessary to get a job done proper and prompt. Then help yourself to the food and further business. And I thought, America can do that.

With n4s finally nearing completion -I used a little assistive AI for the sim / subcircuit API, I can retire in a few days. Have many books by friends I would like to finish and review. Thought I would prepare tomorrow's KDL strip. I get about 50 visitors per strip I draw. My Bloggers get hundreds of views a day for some reason. I will draw on my watch purchase experience -a small gift of love from the Lord.

Tuesday is here. Last night I took more Rivotril than normal and am feeling rested. My weight is around 91.4kg, which is good. It used to be 91.2-91.3kg 6 months ago. Managed to get cleaned well. Brushed. I now need to generate the simBody string for up to 8 subcircuits and indicate on the ASCII diagram, where these subbies are joined. Maybe just out-in, gnd-gnd by default.

Main Blog Page